DataStage Configuration file FAQ


  1. APT_CONFIG_FILE is the file using which DataStage determines the configuration file (one can have many configuration files for a project) to be used. In fact, this is what is generally used in production. However, if this environment variable is not defined then how DataStage determines which file to use?
    1. If the APT_CONFIG_FILE environment variable is not defined then DataStage look for default configuration file (config.apt) in following path:
      1. Current working directory.
      2. INSTALL_DIR/etc, where INSTALL_DIR ($APT_ORCHHOME) is the top level directory of DataStage installation.
  2. What are the different options a logical node can have in the configuration file?
    1. fastname – The fastname is the physical node name that stages use to open connections for high volume data transfers. The attribute of this option is often the network name. Typically, you can get this name by using Unix command ‘uname -n’.
    2. pools – Name of the pools to which the node is assigned to. Based on the characteristics of the processing nodes you can group nodes into set of pools.
      1. A pool can be associated with many nodes and a node can be part of many pools.
      2. A node belongs to the default pool unless you explicitly specify apools list for it, and omit the default pool name (“”) from the list.
      3. A parallel job or specific stage in the parallel job can be constrained to run on a pool (set of processing nodes).
        1. In case job as well as stage within the job are constrained to run on specific processing nodes then stage will run on the node which is common to stage as well as job.
    3. resource – resource resource_type “location” [{pools “disk_pool_name”}]  | resource resource_type “value” . resource_type can be canonicalhostname (Which takes quoted ethernet name of a node in cluster that is unconnected to Conductor node by the hight speed network.) or disk (To read/write persistent data to this directory.) or scratchdisk (Quoted absolute path name of a directory on a file system where intermediate data will be temporarily stored. It is local to the processing node.) or RDBMS Specific resourses (e.g. DB2, INFORMIX, ORACLE, etc.)
  3. How datastage decides on which processing node a stage should be run?
    1. If a job or stage is not constrained to run on specific nodes then parallel engine executes a parallel stage on all nodes defined in the default node pool. (Default Behavior)
    2. If the node is constrained then the constrained processing nodes are choosen while executing the parallel stage. (Refer to 2.2.3 for more detail).
  4. When configuring an MPP, you specify the physical nodes in your system on which the parallel engine will run your parallel jobs. This is called Conductor Node. For other nodes, you do not need to specify the physical node.  Also, You need to copy the (.apt) configuration file only to the nodes from which you start parallel engine applications. It is possible that conductor node is not connected with the high-speed network switches. However, the other nodes are connected to each other using a very high-speed network switches. How do you configure your system so that you will be able to achieve optimized parallelism?
    1. Make sure that none of the stages are specified to be run on the conductor node.
    2. Use conductor node just to start the execution of parallel job.
    3. Make sure that conductor node is not the part of the default pool.
  5. Although, parallelization increases the throughput and speed of the process, why maximum parallelization is not necessarily the optimal parallelization?
    1. Datastage creates one process for every stage for each processing node.  Hence, if the hardware resource is not available to support the maximum parallelization, the performance of overall system goes down. For example, suppose we have a SMP system with three CPU and a Parallel job with 4 stage. We have 3 logical node (one corresponding to each physical node (say CPU)). Now DataStage will start 3*4 = 12 processes, which has to be managed by a single operating system. Significant time will be spent in switching context and scheduling the process.
  6. Since we can have different logical processing nodes, it is possible that some node will be more suitable for some stage while other nodes will be more suitable for other stages. So, when to decide which node will be suitable for which stage?
    1. If a stage is performing a memory intensive task then it should be run on a node which has more disk space available for it. E.g. sorting a data is memory intensive task and it should be run on such nodes.
    2. If some stage depends on licensed version of software (e.g. SAS Stage, RDBMS related stages, etc.) then you need to associate those stages with the processing node, which is physically mapped to the machine on which the licensed software is installed. (Assumption: The machine on which licensed software is installed is connected through other machines using high speed network.)
    3. If a job contains stages, which exchange large amounts of data then they should be assigned to nodes where stages communicate by either shared memory (SMP) or high-speed link (MPP) in most optimized manner.
  7. Basically nodes are nothing but set of machines (specially in MPP systems). You start the execution of parallel jobs from the conductor node. Conductor nodes creates a shell of remote machines (depending on the processing nodes) and copies the same environment on them. However, it is possible to create a startup script which will selectively change the environment on a specific node. This script has a default name of startup.apt. However, like main configuration file, we can also have many startup configuration files. The appropriate configuration file can be picked up using the environment variable APT_STARTUP_SCRIPT. What is use of APT_NO_STARTUP_SCRIPT environment variable?
    1. Using APT_NO_STARTUP_SCRIPT environment variable, you can instruct Parallel engine not to run the startup script on the remote shell.
  8. What are the generic things one must follow while creating a configuration file so that optimal parallelization can be achieved?
    1. Consider avoiding the disk/disks that your input files reside on.
    2. Ensure that the different file systems mentioned as the disk and scratchdisk resources hit disjoint sets of spindles even if they’re located on a RAID (Redundant Array of Inexpensive Disks) system.
    3. Know what is real and what is NFS:
      1. Real disks are directly attached, or are reachable over a SAN (storage-area network -dedicated, just for storage, low-level protocols).
      2. Never use NFS file systems for scratchdisk resources, remember scratchdisk are also used for temporary storage of file/data during processing.
      3. If you use NFS file system space for disk resources, then you need to know what you are doing. For example, your final result files may need to be written out onto the NFS disk area, but that doesn’t mean the intermediate data sets created and used temporarily in a multi-job sequence should use this NFS disk area. Better to setup a “final” disk pool, and constrain the result sequential file or data set to reside there, but let intermediate storage go to local or SAN resources, not NFS.
    4. Know what data points are striped (RAID) and which are not. Where possible, avoid striping across data points that are already striped at the spindle level.
Tagged with: , , , , ,
Posted in Data Warehouse & BI
13 comments on “DataStage Configuration file FAQ
  1. Thanks for Information Datastage training can justify the ideas of DataStage Enterprise Edition, its design and the way to use this to ‘real life’ situations in an exceedingly business case-study during which you may solve business issues.Datastage Online Training

  2. It’s impressive that you are getting ideas from this article as well as from our dialogue made at this place.

  3. I personally think this specific blog post , “DataStage Configuration file
    FAQ Walking Tree”, particularly entertaining and also the post ended up being a wonderful read.
    Thanks for your time,Melodee

  4. Otavio Nunes says:

    Quick question: How do I create the node pools? Is it something DS creates by itself?

  5. joel says:

    really good one , thanks.. but i have one question like how can we identify the node whether it is a logical or a physical node

  6. lakshmi says:

    its very useful

  7. Sandy Prasetya says:

    Thanks for this great article, it help us to understand more about datastage configuration and parallelism process inside it. Btw I ask your permission to put this article into my personal blog (http://datastage-notes.blogspot.com/2011/07/what-should-you-know-about-datastage.html)

    Thanks
    Sandy

    • Walking Tree says:

      It is my pleasure, if you want to refer this article in your blog. Thank you for your encouraging feedback.

      • Sandy Prasetya says:

        Thanks to you too 🙂 This is my first technical (and personal) blog, and I hope we can keep in touch, especially when talking about DataStage and all of it’s stuff.

        Keep happy writing,
        Sandy PH

  8. Hi this is very interesting article to me. I got good information about configuration file. Thanks for sharing dude.

  9. Subhashree says:

    Well descibed… Very good article

  10. lipika says:

    i thing its enough fo descibe config file.yes it is best ans

  11. manishbhoge says:

    Very Good Insight of the configuration file

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

We Have Moved Our Blog!

We have moved our blog to our company site. Check out https://walkingtree.tech/index.php/blog for all latest blogs.

Sencha Select Partner Sencha Training Partner
Xamarin Authorized Partner
Recent Publication
%d bloggers like this: